So:
1. What does Windows show for the drive sizes ?
2. Is there anything special here like a VM ?
3. Or a NAS drive ? (Noting the 18TB drive).
4. Or a normal pc with a few hard drives in it.
Does anybody have any other ideas here ? Feel free to post
AddToBIDB failed 161
Re: AddToBIDB failed 161
We are getting closer. If BI5 doesn't know how big your drives are, or how much free space there is on them, then chaos will ensue. I have never seen this before - note this is a peer to peer forum, and we are learning too - so do send an email to Support for official help.
So:
1. What does Windows show for the drive sizes ?
2. Is there anything special here like a VM ?
3. Or a NAS drive ? (Noting the 18TB drive).
4. Or a normal pc with a few hard drives in it.
Does anybody have any other ideas here ? Feel free to post
So:
1. What does Windows show for the drive sizes ?
2. Is there anything special here like a VM ?
3. Or a NAS drive ? (Noting the 18TB drive).
4. Or a normal pc with a few hard drives in it.
Does anybody have any other ideas here ? Feel free to post
Forum Moderator.
Problem ? Ask and we will try to assist, but please check the Help file.
Problem ? Ask and we will try to assist, but please check the Help file.
-
charlescrockett
- Posts: 8
- Joined: Sun Aug 13, 2023 8:57 pm
Re: AddToBIDB failed 161
I just made some changes to the BI Settings Storage settings. This is now my BI Status Storage, followed by my BI Status Log.
Thanks for any help.
- Screenshot 2023-10-30 163715.png (54.19 KiB) Viewed 8749 times
- Screenshot 2023-10-30 163815.png (70.06 KiB) Viewed 8749 times
- Attachments
-
- Screenshot 2023-10-30 163715.png (54.19 KiB) Viewed 8749 times
Re: AddToBIDB failed 161
Are both the c and d drives local drives?
What changes did you make, maybe post screenshots of the actual storage settings?
What changes did you make, maybe post screenshots of the actual storage settings?
-
charlescrockett
- Posts: 8
- Joined: Sun Aug 13, 2023 8:57 pm
Re: AddToBIDB failed 161
I finally got my issue fixed. The bIDB failed 161 was a problem with the PATH NAME. Ken in support was able to tell me what to look for. I have copied the contents of the email below.
KEN:
The error 161 is BAD PATH NAME.
WHat do you have for the New folder on Settings/Storage? Did you override this on the Record tab in camera settings?
Double checked all security software exemptions?
CHARLES:
On the Settings/Storage I have D:\BlueIris\New1. I did have it as C:\BlueIris\New, but changed it trying to get things to work.
On the Camera Settings, I have C:\\BlueIris\New\&CAM.%Y\%m\%d\&CAM._%H%M%S as the folder name.
I use Windows Defender as my virus protection. I have not made any changes to that. I looked at the Allowed Apps for Windows Defender Firewall. See the attachment.
KEN:
Two things:
C:\\BlueIris\New\
You have a double \\ in there
You don't need to put the full path ... just put
&CAM.%Y\%m\%d\&CAM._%H%M%S
KEN:
The error 161 is BAD PATH NAME.
WHat do you have for the New folder on Settings/Storage? Did you override this on the Record tab in camera settings?
Double checked all security software exemptions?
CHARLES:
On the Settings/Storage I have D:\BlueIris\New1. I did have it as C:\BlueIris\New, but changed it trying to get things to work.
On the Camera Settings, I have C:\\BlueIris\New\&CAM.%Y\%m\%d\&CAM._%H%M%S as the folder name.
I use Windows Defender as my virus protection. I have not made any changes to that. I looked at the Allowed Apps for Windows Defender Firewall. See the attachment.
KEN:
Two things:
C:\\BlueIris\New\
You have a double \\ in there
You don't need to put the full path ... just put
&CAM.%Y\%m\%d\&CAM._%H%M%S
Re: AddToBIDB failed 161
So to summarise, you made a change and that broke it 
Would have been worth just backtracking the change you made as that might have pointed out what you did wrong.
Would have been worth just backtracking the change you made as that might have pointed out what you did wrong.