Hello,
I have a couple Arecont 10mp cameras w/ 100' IR's They work great in Milestone but not so well in BI. Blue Iris doesn't recognize substreams and only puts the cameras at 2.1 MP. The cameras are 10225PMTIR. I have their last firware loaded but they have since disoconued the cameas. BI doesn't recognize all of the features and I'm guessing it's becasue of the Discovery/ONVIF port is incorrect. BI sets it at 8999. Any suggestions or is it a lost cause, hope not.
Any ideas on different ports to try?
They are ONVIF complient - ONVIF Profile S, PSIA Conformance
I really don't want to buy 2 new cameras.
Thanks,
MIchael
Help w/ Arecont cameras and BI - ONVIF Port
Re: Help w/ Arecont cameras and BI - ONVIF Port
Could you not try changing the port on the cam itself to see if BI can then properly detect the cam?
Re: Help w/ Arecont cameras and BI - ONVIF Port
I've had a look at the installation manual, and it doesn't mention Onvif ports or settings, however this Arecont Support page does. I was going to suggest using ODM to find the settings, but it's all in that Support info.
This Support page shows how to connect to rtsp streams.
Good luck![Idea :idea:](./images/smilies/icon_idea.gif)
This Support page shows how to connect to rtsp streams.
Good luck
![Idea :idea:](./images/smilies/icon_idea.gif)
Forum Moderator.
Problem ? Ask and we will try to assist, but please check the Help file.
Problem ? Ask and we will try to assist, but please check the Help file.
Re: Help w/ Arecont cameras and BI - ONVIF Port
Thanks Tim. I tried both yesterday in fact tried again today w/ no luck. ODM timesout everytime.When i run the command for the HTTP port I get "Error: Unknown parameter or value missing."
Michael
Michael