Reolink RLC-420-5MP - so far so good

User avatar
Thixotropic
Posts: 743
Joined: Wed Sep 04, 2019 7:20 pm
Location: Low-Earth Orbit

Re: Reolink RLC-420-5MP - so far so good

Post by Thixotropic »

I think I went into the cam interface itself and set everything to "Fluent". Somewhere in the interface it shows the stream settings, but I left most of those as they were.


melias wrote: Wed Nov 27, 2019 3:32 pm What stream are you guys using for the RLC-410/420 cameras in BI? Mine auto detected the following but I'd like to know how to specify the "clear" or "fluent" stream. Do I just change all the zeros to ones?
/bcs/channel0_main.bcs?channel=0&stream=0&user={id}&password={pw}
Blue Iris 5.x x64 | Windows 10 Pro x64 | 16GB RAM | i7-7700 3.6 GHz | 1TB HDD | 2TB RAID NAS | 9 Cameras | Almost Dual NIC | 2KVA UPS
melias
Posts: 5
Joined: Wed Nov 27, 2019 3:19 pm

Re: Reolink RLC-420-5MP - so far so good

Post by melias »

melias wrote: Wed Nov 27, 2019 3:32 pm What stream are you guys using for the RLC-410/420 cameras in BI? Mine auto detected the following but I'd like to know how to specify the "clear" or "fluent" stream. Do I just change all the zeros to ones?
/bcs/channel0_main.bcs?channel=0&stream=0&user={id}&password={pw}
Based on BI's reported bitrate (in the Status windows), it's streaming the clear (high) quality stream which is fine with me.
Post Reply