Uniview WiFi cameras acting weird

General discussion about Blue Iris
Post Reply
adlib
Posts: 2
Joined: Sat Sep 05, 2020 10:05 pm

Uniview WiFi cameras acting weird

Post by adlib » Sat Sep 05, 2020 10:36 pm

I’ve installed thousands if not tens of thousands cameras from various brands on BI and never had any need for support, but this time there’s a catch I can’t find a solution for. Rarely using WiFi cameras, but sometimes for some budget builds they’re useful. So the problem is with those two Uniview WiFi camera models IPC2122SR3-F40W-D and IPC2124LR3-F40W-D. Everything works, stream/network is stable with low latency and then suddenly resolution changes from 1080p to 720p or from 4mp to 1080p according to camera model and image gets cropped and stays there until you restart the stream. Network is stable and it happens in many different installations on different servers and only with those two cameras. Steam itself stays as it should - when viewing on vlc nothing changes there. Only solution I found so far is to enable watchdog and restart the stream in every 1h. Any suggestions?
User avatar
TimG
Posts: 725
Joined: Tue Jun 18, 2019 10:45 am
Location: Nottinghamshire, UK.

Re: Uniview WiFi cameras acting weird

Post by TimG » Sun Sep 20, 2020 11:50 am

Hi adlib,

If it retains the resolution in VLC but has altered in BI5, then it does look like a BI5 compatibility issue. Have you sent an email to support ?
Blue Iris v5.3.3.16 | Win10 x64 version 20H2 | Dahua IPC-HDW5231R-ZE, Foscam R2, Ertech 4MP, Neos2, 2 analogue cameras on Euresys Picolo Pro 2 | Intel i5-3330 CPU, 16GB Ram, Multiple SSD and HD | TVMosaic.
Post Reply