Search found 1077 matches
- Tue Aug 25, 2020 3:08 am
- Forum: Blue Iris 5
- Topic: Motion Detection Indicator
- Replies: 1
- Views: 2113
Re: Motion Detection Indicator
I'm note sure. But, you can always send BI Support a message about it.
- Tue Aug 25, 2020 3:04 am
- Forum: Blue Iris 5
- Topic: Cloud shadows
- Replies: 2
- Views: 2931
Re: Cloud shadows
Have you tried 'Cancel Shadows'? This may reduce triggers, but it will not eliminate them.
I use 'Zone Triggering' on a few cameras, which has reduced triggers caused by clouds to almost none.
I use 'Zone Triggering' on a few cameras, which has reduced triggers caused by clouds to almost none.
- Tue Aug 25, 2020 2:46 am
- Forum: Blue Iris 5
- Topic: Diagnosing Computer Crashes
- Replies: 15
- Views: 15499
- Tue Aug 25, 2020 2:35 am
- Forum: Blue Iris 5
- Topic: How to synchronize profiles with light levels?
- Replies: 4
- Views: 5670
Re: How to synchronize profiles with light levels?
You could send BI Support a request to add those controls.
- Fri Aug 07, 2020 6:53 am
- Forum: General discussion
- Topic: Camera overwriting past video sessions
- Replies: 1
- Views: 3317
Re: Camera overwriting past video sessions
Blue Iris does not overwrite files. All recordings have unique names. I believe what your experiencing is a short retention of files, and they are reaching a size/age limit and being deleted. Could you post a screen shot of the BI settings 'Clip and archiving' tab? Here's how to change the Clip arch...
- Fri Jul 31, 2020 7:31 am
- Forum: Blue Iris 5
- Topic: BI is only showing one of my 4 cameras
- Replies: 8
- Views: 7088
Re: BI is only showing one of my 4 cameras
The Amcrest NVR you have connects to your router via an Ethernet cable. It does not have Wifi. Your cameras can connect to your router either via wifi or Ethernet cable. If cable, a switch would be necessary, unless you have 4 free ports on your router - which is unlikely as routers have only 4 port...
- Fri Jul 31, 2020 2:31 am
- Forum: Blue Iris 5
- Topic: How to synchronize profiles with light levels?
- Replies: 4
- Views: 5670
Re: How to synchronize profiles with light levels?
You could accomplish this in BI by going tot he cameras 'Schedules' tab, then clicking the 'Event Schedule tab. When adding an event and setting a time, make sure to click the 'Relative to sunrise/sunset' checkbox. This will adjust the time of the event each day. You could turn off the day/night Aut...
- Wed Jul 29, 2020 2:49 am
- Forum: Blue Iris 5
- Topic: Elementary Question!
- Replies: 2
- Views: 3085
Re: Elementary Question!
There is a round-about way using a clone of the camera. You can't 'follow' an object.. But, you can move the camera in the direction that the object is moving. This is done with 1 or more clones of the camera. Basically, using the original camera, setup a cross-zone moving left to right. Have the ca...
- Thu Jul 23, 2020 4:27 pm
- Forum: Blue Iris 5
- Topic: PTZ motion detecting while panning
- Replies: 2
- Views: 3726
Re: PTZ motion detecting while panning
Yes, there are two options for suspending motion detection on PTZ movement. In the cameras settings 'PTZ/Control' tab... - Check the 'Suspend motion detection' box. This is the default. - 'Max travel time/motion delay'. Set this to the max time it takes to move the camera to the PTZ preset. For exam...
- Tue Jul 21, 2020 3:16 am
- Forum: General discussion
- Topic: Substreams and Foscam R2
- Replies: 19
- Views: 16764
Re: Substreams and Foscam R2
Thanks TimG.
Tried those settings. Still having the issue. I think this is a lost cause.
Tried those settings. Still having the issue. I think this is a lost cause.