Yes, there is another way. You be the judge if this is easier. The way you have it sill work. The way described below, BI will automatically take snapshots between the times you specify. Before making these changes, please Export the cameras settings. This will make it easier to revert back (by impo...

You can download the spec sheet and user's manual from their website. Should contain the info you want. It's not specifically listed in the Blue Iris list of cameras. But, you could inquire about it by sending BI support a message. Maybe they will add it to the list. https://www.feit.com/product/led...

I switched from TeamViewer to AnyDesk. I've found that AnyDesk uses much less cpu.

AnyDesk runs on a Desktop or Android phone, and can be remotely controlled.

Why is MJPEG needed? I'm just curious. There are several good quality cameras that have 150 to 180 wide angle! You just need to search for them. Took me just a few minutes. https://www.marchnetworks.com/products-services/cameras/360-and-180-degree-cameras/180-degree-cameras/ https://www.securitytec....

Not that I'm aware of. Try this... 1. Define the camera again as a separate HD stream. 2. Set this camera to record on trigger, without any motion detection. So essentially, the HD camera will never record on it's own. 3. Set the SD camera to trigger the HD camera. You could also use profiles is you...

Maybe try just 1 camera for several minutes. Then keep adding the other cameras to see if your network is getting saturated. A cell phone data bandwidth is much lower than an internet isp. Other thoughts... - Lower the resolutions of the cameras to lower bandwidth. - Adjust the streaming profile in ...

I reverted back to 2.0.17. Geofence is working. I made no Android changes.

latest version of the Android app from Google Play... 3.0.19.
Location services are turned ON, and, location services permission are enabled for the BI app.
Lat/Lon set in the BI console.

Still no Geofence.

I think we could use two new areas for the IOS and Android BI apps.

This is not a BI issue, but in how BI finds the presets when doing Video/Configure/'Find/Inspect'. BI find the presets in the order they appear from the camera. In my case, my cameras have 4 pre-defined preset names that gets pulled in first. So, in BI, ptz 1 is actually ptz 13, 2 of 14, 3 is 15, an...