Search found 574 matches

by MikeBwca
Fri Jul 31, 2020 7:31 am
Forum: Blue Iris 5
Topic: BI is only showing one of my 4 cameras
Replies: 8
Views: 892

Re: BI is only showing one of my 4 cameras

The Amcrest NVR you have connects to your router via an Ethernet cable. It does not have Wifi. Your cameras can connect to your router either via wifi or Ethernet cable. If cable, a switch would be necessary, unless you have 4 free ports on your router - which is unlikely as routers have only 4 port...
by MikeBwca
Fri Jul 31, 2020 2:31 am
Forum: Blue Iris 5
Topic: How to synchronize profiles with light levels?
Replies: 4
Views: 573

Re: How to synchronize profiles with light levels?

You could accomplish this in BI by going tot he cameras 'Schedules' tab, then clicking the 'Event Schedule tab. When adding an event and setting a time, make sure to click the 'Relative to sunrise/sunset' checkbox. This will adjust the time of the event each day. You could turn off the day/night Aut...
by MikeBwca
Wed Jul 29, 2020 2:49 am
Forum: Blue Iris 5
Topic: Elementary Question!
Replies: 3
Views: 571

Re: Elementary Question!

There is a round-about way using a clone of the camera. You can't 'follow' an object.. But, you can move the camera in the direction that the object is moving. This is done with 1 or more clones of the camera. Basically, using the original camera, setup a cross-zone moving left to right. Have the ca...
by MikeBwca
Thu Jul 23, 2020 4:27 pm
Forum: Blue Iris 5
Topic: PTZ motion detecting while panning
Replies: 2
Views: 479

Re: PTZ motion detecting while panning

Yes, there are two options for suspending motion detection on PTZ movement. In the cameras settings 'PTZ/Control' tab... - Check the 'Suspend motion detection' box. This is the default. - 'Max travel time/motion delay'. Set this to the max time it takes to move the camera to the PTZ preset. For exam...
by MikeBwca
Tue Jul 21, 2020 3:16 am
Forum: General discussion
Topic: Substreams and Foscam R2
Replies: 10
Views: 1620

Re: Substreams and Foscam R2

Thanks TimG.

Tried those settings. Still having the issue. I think this is a lost cause.
by MikeBwca
Mon Jul 20, 2020 2:41 am
Forum: General discussion
Topic: Substreams and Foscam R2
Replies: 10
Views: 1620

Re: Substreams and Foscam R2

TimG...

Could you post a screen shor of your video config screen?

Also, the sub stream will show a much lower bitrate. I probably won't use the sub stream, since it's 640/480. I'd much rather see what's going on with hthe mainstream. But, it would be nice to get it going for future reference.
by MikeBwca
Mon Jul 20, 2020 2:35 am
Forum: General discussion
Topic: Handy FOV/Viewing Angle chart
Replies: 6
Views: 1082

Re: Handy FOV/Viewing Angle chart

In the past, I went to google maps to bring up my yard. Then used a protractor on the screen to figure the angles and distance!
by MikeBwca
Sat Jul 18, 2020 3:11 am
Forum: Blue Iris 5
Topic: Blue Iris Crash -
Replies: 2
Views: 793

Re: Blue Iris Crash -

You have the info BI Support would request.
I'd send that to BI Support.
by MikeBwca
Sat Jul 18, 2020 3:06 am
Forum: General discussion
Topic: Camera Schedule
Replies: 1
Views: 781

Re: Camera Schedule

This can be done by clicking the day names on the left - holding CTL to add/remove a day. Or, clicking the 'Days' button.
by MikeBwca
Sat Jul 18, 2020 2:36 am
Forum: Blue Iris 5
Topic: Limit decoding unless required
Replies: 5
Views: 1180

Re: Limit decoding unless required

I did get substream to work in my older Foscam 9826p v2, But, the main stream stopped! I haven't figured that out, and I just gave up on it.