Roll it back to the previous version and see if the problem is corrected.

edit: Maybe the 'Register IP address to assist...' is checked on the About page registration and is cached somewhere on BI servers?

Yeah, I'm a real barrel o' laughs. :lol: Your facts are incorrect when it comes to the Reolink cameras and RTMP . I never claimed RTMP didn't support H265. I said "RTMP is not supported in 4K and above Reolink cameras using their main H265 stream" which is a documented fact. Period. The en...

Thanks, but batch file did not make any difference, still not starting. A correctly constructed batch file will work and is documented from several sources. But how about this since it sounds like you have BI on a dedicated machine anyway..., Run BI as a service, open the desktop, leave it open lik...

RTMP is not supported in 4K and above Reolink cameras using their main H265 stream. Period. The end. The sub-stream and lower main stream resolutions at H264 should work with RTMP, but what's the point if it's a new Duo 3 or any other hi-res camera? RTSP works fine under those conditions anyway. The...

Care to share your configuration and main stream info for a 4K camera successfully running RTMP?

RTMP isn't functional on anything beyond 5MP cameras from what I understand (and have personally experienced.) The port and protocol are there but only for proprietary communication between cameras and the client/app. An normal RTMP stream is unattainable from my experience (and according to Reolink...

This subject has been extensively addressed. Add the XVR to Blue Iris by its IP address and login credentials just like you would add a camera. Camera channel 1 will be added by default. You may want to try 'Find/Inspect' with just the IP address and login credentials to obtain the correct stream in...

The GUI is an optional feature of BI (when run as a service) and needs to be invoked.

Write a batch file that does it for you if clicking a shortcut is too much trouble.

Another possible negative that I neglected to specifically mention is the C110s are an indoor (or protected environment) device which the OP did indicate were his general conditions.

Anyone else considering a Tapo for an outdoor environment should look at their other economical models for the task.

I used to run several WyzeCam v.3s with their Beta RTSP firmware with very few problems on my wi-fi setup. It is admittedly fairly robust and channelized for both efficiency and reliability in a very clean RF environment. Then I discovered the wz_mini_hacks Github project and went all in on the USB/...