Search found 459 matches

by Pogo
Fri May 31, 2024 8:39 pm
Forum: Blue Iris 5
Topic: UI3 Hangs - old/new setup
Replies: 3
Views: 78

Re: UI3 Hangs - old/new setup

Maybe try pushing a few more frames toward UI3 for the encoding involved to create its main streams? Certainly can't explain why it used to work fine but now it doesn't. Seems to be a lot of that going around lately. What are you viewing UI3 on? I fired mine up last night on a ONN GoogleTV streamer ...
by Pogo
Thu May 30, 2024 1:47 am
Forum: Blue Iris 5
Topic: New cameras, old server, lots of hangs
Replies: 8
Views: 200

Re: New cameras, old server, lots of hangs

I'll be curious to know how you get it sorted out.

Good luck with it.
by Pogo
Thu May 30, 2024 1:37 am
Forum: Blue Iris 5
Topic: New cameras, old server, lots of hangs
Replies: 8
Views: 200

Re: New cameras, old server, lots of hangs

Someone else will need to hop in for the UI3 stuff. I only use it infrequently.
by Pogo
Thu May 30, 2024 12:43 am
Forum: Blue Iris 5
Topic: New cameras, old server, lots of hangs
Replies: 8
Views: 200

Re: New cameras, old server, lots of hangs

So... maybe these camera's implementation of H.265 is flawed (I saw that because their own web display does not work)? The problem is Blue Iris and a horrible implementation of H.265 decoding with or without QuickSync HA support..., and even being able to handle main stream 4K in H.264 at any respe...
by Pogo
Wed May 29, 2024 10:41 pm
Forum: Blue Iris 5
Topic: New cameras, old server, lots of hangs
Replies: 8
Views: 200

Re: New cameras, old server, lots of hangs

More details about the current hardware would be helpful as would additional detail about the camera configurations. Try the cameras at their default settings with VLC viewer on a different machine if possible. If that isn't possible, shut down Blue Iris and try VLC on the same machine. Direct to di...
by Pogo
Mon May 27, 2024 3:33 pm
Forum: PC configuration
Topic: Config/resource goof.
Replies: 12
Views: 1270

Re: Config/resource goof.

There may not be much load on the GPU. You select 'Intel' as the hardware acceleration preference in the Cameras tab of the main BI settings window. Then select 'default' for 'Hardware decode' in each camera's video configuration. You can alternatively leave the blanket default entry in the main BI ...
by Pogo
Sun May 26, 2024 1:33 am
Forum: PC configuration
Topic: Config/resource goof.
Replies: 12
Views: 1270

Re: Config/resource goof.

Open Task Manager and check the Performance tab for both a CPU and a GPU. If there's an active GPU, QuickSync is enabled. The BI Status window will also display an 'I' in the HA column if Intel is selected as the default processor and/or either 'Default' or 'Intel' are selected in the camera 's Hard...
by Pogo
Thu May 23, 2024 5:43 pm
Forum: General discussion
Topic: Recording only during daylight hours
Replies: 1
Views: 120

Re: Recording only during daylight hours

There are a couple ways to do this. The simplest is probably what is shown below. Record Schedule.jpg The normal green active Profile 1 is the period of recording by virtue of the Record settings of the camera if it is set to record. Just schedule the desired start and stop time points accordingly u...
by Pogo
Thu May 23, 2024 12:19 pm
Forum: PC configuration
Topic: BI Computer Purchase
Replies: 23
Views: 38257

Re: BI Computer Purchase

Pogo will be displeased :lol: To the contrary, I'm delighted the OP has arrived at a solution for his particular issue. Trust me, I share his frustration, albeit at the other end of the stream in the 4K UHD realm rather than the sub stream..., with a 22 camera system, not just 2 cameras running wit...
by Pogo
Wed May 22, 2024 1:08 am
Forum: Blue Iris 5
Topic: Occasional Bug, causing CPU spike
Replies: 2
Views: 168

Re: Occasional Bug, causing CPU spike

Task Manager is your friend.