Windows Errors

This forum lists all the articles available when you experience issues with Blue Iris.
Start with the Windows Tuning article.
Post Reply
varghesesa
Posts: 90
Joined: Thu Jul 11, 2019 9:52 pm

Windows Errors

Post by varghesesa »

Introduction

This article identifies known errors and fixes based on Windows dependencies.

Gotchas

This section documents learnings from past tickets.

BI Dependencies

VC++ Libraries

windows errors_0xc0000007b.png
windows errors_0xc0000007b.png (165.95 KiB) Viewed 21197 times
windows errors_vcruntime.jpg
windows errors_vcruntime.jpg (25.63 KiB) Viewed 21659 times

Both of the above error messages stem from the same issue. BI is a C++ program that runs on Windows. The program relies heavily on Microsoft's VC++ libraries.
If the installer fails, often your Windows machine does not have the right version of VC++ installed.

Download/install libraries from Microsoft.

Source File Format is Corrupt

k-lite error.PNG
k-lite error.PNG (20.58 KiB) Viewed 21991 times
The error message is saying
  • Either you decided to save your recordings in a non-BVR format, e.g. MP4. If your New directory has mp4 recordings instead of BVR recordings, this is the issue.
    record mp4.png
    record mp4.png (43.8 KiB) Viewed 21991 times

    Most users switch recordings back to BVR format for its many advantages, including playback in the UI.

    If you decide to remain in MP4 format, most users just double-click the mp4 file in Windows Explorer and has it play on Windows default player. If you want to play an mp4 within BI, please install the k-lite plugin. You need only the “basic” version.
    See FAQ section in Help for details.
  • Or the BVR recording was somehow corrupted.
    Check your New folder. If you now have many files that are small like 1K, then BVR files are being corrupted.
    corrupt files.png
    corrupt files.png (23.66 KiB) Viewed 21991 times

    Fix:
Registry

"Error importing the registry Key:5"

Running BI without admin privileges or security software (Kaspersky) is preventing access to registry. Error code 5 means access denied.
  • Run REGEDIT and locate the key "HKLM\Software\Perspective Software\Blue Iris Import". It's the import key you want.
  • Find the 'a1' key in "HKLM\Software\Perspective Software\Blue Iris Import" and right-click edit permissions. Add "full control" to the administrators group.
  • You should now be able to delete the import key and startup.
  • Go through the Windows Tuning article to make sure Windows is not in conflict with Blue iris.
    https://blueirissoftware.com/forum/view ... =12&t=2080
Windows console: Missing camera windows.

It sounds like the camera may be open in a window behind the main window, another monitor, or possibly minimized?

You can always run REGEDIT and delete the camera from this key:
HKEY_CURRENT_USER\SOFTWARE\Perspective Software\Blue Iris\Cameras --> NOTICE this is CURRENT_USER and not LOCAL_MACHINE!!
This is where the window position and state are memorized.

RegSaveKeyEx Error

The path you listed to save the registry settings does not exist. Need to reset the path.
Global settings -> About tab

status log error regsaveex.png
status log error regsaveex.png (1.57 KiB) Viewed 21998 times

Service

Errors associated with running BI as a service.

1057 Error

If you get the 1057 error, i.e. “Failed to install service (1057)”, the username chosen to run the service does not exist or is invalid. See Service section of Windows Tuning article to create a local Windows account with admin privileges. Run Windows Services -> Right click Blue Iris Service -> Properties -> Log on tab. Specify username / password.


1069 Error

The 1069 Windows error occurs when the password associated with the Windows username associated with the service has changed. Run Windows Services -> Right click Blue Iris Service -> Properties -> Log on tab -> reset the password.
1069 error.png
1069 error.png (10.92 KiB) Viewed 21986 times

1327 Error

windows errors_1327.png
windows errors_1327.png (23.91 KiB) Viewed 20964 times

In order to run a Windows Service, the Windows account has to have password.

windows errors_1327_login.png
windows errors_1327_login.png (31.49 KiB) Viewed 20964 times

Auto-update fails because update program cannot stop the service. Following error message appears.

blueirisservice.png
blueirisservice.png (5.34 KiB) Viewed 21986 times
  • Stop the Blue Iris Service manually. From the Windows search bar, type services and bring up the Services console.
  • Select the Blue Iris service.
  • Select "Stop service"
  • Start BI.
  • Return to BI. Global settings -> Startup tab -> Run as a Windows service. Check the selection.
  • Restart BI. BI should start as a service.
Auto-update fails because update program cannot stop BI. Following error message appears. (Similar issue as above)

update error.PNG
update error.PNG (48.1 KiB) Viewed 21986 times
  • Stop Blue Iris manually.
  • Restart the machine.
  • Find where you downloaded the update or just go to blueirissoftware.com and download the latest version.
  • Install/start the latest version and you should be good to go.

Web server

12002 Error

windows errors_12002.png
windows errors_12002.png (52.47 KiB) Viewed 21768 times

Communication issues related to error 12002 and 12029 are usually related to a network block of some sort. This is often due to the Windows firewall blocking access to the BI Web server for communication.

Symptoms: UI3 or the Mobile apps stop working.

Test: When you start experiencing issues, restart BI. Confirm via Remote Access Wizard whether the web server is running initially via the Web Server page.

windows errors_web server ok.png
windows errors_web server ok.png (52.14 KiB) Viewed 21768 times

When remote access breaks (UI3, mobile apps), recheck via the Wizard whether the web server is accessible.

Fix: Double check your Windows anti-virus and firewall settings. Double check your router settings. Something is blocking traffic to the web server. If problem persists contact support.
Post Reply