Page 1 of 1
ESP32 Tasmota
Posted: Sun Jul 04, 2021 2:58 am
by sailing
Hi, is anyone using an ESP32 with BI. I can't get the correct video settings. I have tried port 81,mjpeg setting, /stream and/or /cam.mjpeg but can't get it to work.
Any help would be appreciated.
Re: ESP32 Tasmota
Posted: Sun Jul 04, 2021 10:00 pm
by sailing
I found the settings
use :81 at the end of your IP address
no username or password
Brand is EasyCam
MJPEG
Profile /stream
Re: ESP32 Tasmota
Posted: Mon Jul 05, 2021 5:59 pm
by TimG
Good info thanks. What is the maximum resolution and FPS you can do with these ?
Re: ESP32 Tasmota
Posted: Tue Jul 06, 2021 12:59 am
by sailing
Apparently they can go up to 1600x1200. Not bad for ten dollars!!!! I am using mine to internally monitor a delivery box and am only using 320x240. BI says the stream is 0.1M and about 20fps at that resolution. One of the problems with these units is that they overheat and I am wanting to reduce the frame rate to avoid this problem.