Zoom Control UBNT G3 Pro

Post Reply
plongson
Posts: 16
Joined: Wed Oct 23, 2019 1:06 pm

Zoom Control UBNT G3 Pro

Post by plongson » Wed Mar 10, 2021 10:08 pm

Running BI v.5.3.9.13 x64 and have about 6 Amcrest cameras. I purchased a Ubiquiti G3 Pro that installed just fine...with one issue...

I cannot control zoom or focus from BI on the G3 Pro, only from the Ubiquiti camera program.

Can this be done with BI?? There is no listing for Ubiquiti under PTZ/Control/network IP settings
User avatar
TimG
Posts: 1114
Joined: Tue Jun 18, 2019 10:45 am
Location: Nottinghamshire, UK.

Re: Zoom Control UBNT G3 Pro

Post by TimG » Fri Mar 12, 2021 6:26 pm

Hi plongson,

That's one for support I'm afraid. They would probably need to log in to your system to figure it out.
BI5 v54904 x64 | Win10 21H1 | Dahua IPC-HDW5231R-ZE, Foscam R2, Ertech 4MP, Neos2, 2 SD cams | BI5:1 i5-3330, 16GB Ram, Multiple SSD and HD, Homeseer 2 HSPhone, TVMosaic | BI5:2 Ryzen 1800X, 16GB Ram, Multiple SSD and HD, Homeseer 4, Emby, DVBViewer.
Post Reply