DLink DCS-8000 ip camera problems

Post Reply
homelyn
Posts: 3
Joined: Thu Mar 05, 2020 1:19 pm

DLink DCS-8000 ip camera problems

Post by homelyn » Sat Jun 27, 2020 3:46 pm

HI

I am using BI4 with Win10.

I have a DCS-8000 ip cam that I want to use with my BI4.

I know the I address for it, so , when I try to configure BI with the camera it cannot be found using find/inspect even though it I listed in the full list of cameras compatible with BI.

Any ideas guys?

Help would be appreciated

Eric

MikeBwca
Posts: 541
Joined: Thu Jun 20, 2019 5:39 am

Re: DLink DCS-8000 ip camera problems

Post by MikeBwca » Sun Jun 28, 2020 4:55 am

The only things I can think of is...
- Are you specifying he port number also with the ip address?
- Make sure the 'Media/video/RTSP' port is correct. Not sure if this is necessary when using 'Find/Inspect'.
- Make sure the 'Discovery/ONVIF' port number is correct.

If noting else works, You can specificaly choose the make & model.
Last report, speficy Generic ONVIF.

homelyn
Posts: 3
Joined: Thu Mar 05, 2020 1:19 pm

Re: DLink DCS-8000 ip camera problems

Post by homelyn » Sun Jun 28, 2020 1:22 pm

Mike

thanks for the reply have tried all these things, tried to reset the ipcam as well, just cant seem to get it to link t BI4

Cheers

eric

Post Reply