Problem with UI3 since updating to BI 5.3.2.6 (9/7/2020)

User avatar
aerostar
Posts: 16
Joined: Thu Aug 27, 2020 12:39 pm

Problem with UI3 since updating to BI 5.3.2.6 (9/7/2020)

Post by aerostar »

I installed the update this morning. UI3 now showing repeating yellow notification popups "Video delay has exceeded 60 seconds. The stream is being automatically reinitialized."

I'm getting a FPS of 1 whether in a multicam view or single cam view. BI on the server showing typical CPU/MEMORY utilization for my system and no anomalies. I've restarted the service, no help.

When I switch UI3 to Javascript the notifications go away, FPS goes to 30, CPU and Memory hover around typical values. Switching back to HTML5, the problem resumes.

One of my cams (REOLINK) went offline after the update, but it's back online now. I disabled it for troubleshooting purposes, but ruled out any connection to the problem from this camera.

P.S. I just reverted back to last stable release 5.3.1.6 and the problem remains, so now I'm wondering if the problem is unrelated to the install of the latest release. It's hard for me to imagine it is not because everything was running like a fine-tuned race car just before I installed 5.3.2.6.
User avatar
aerostar
Posts: 16
Joined: Thu Aug 27, 2020 12:39 pm

Re: Problem with UI3 since updating to BI 5.3.2.6 (9/7/2020)

Post by aerostar »

Here's a screenshot of the UI3 interface running HTML5:

Image

Here's one with UI3 player running Javascript:

Image
Brucew
Posts: 7
Joined: Sat Dec 28, 2019 12:01 pm

Re: Problem with UI3 since updating to BI 5.3.2.6 (9/7/2020)

Post by Brucew »

I am also experiencing that issue since installing 5.3.2.6 yesterday. I can only view streaming video in HDJPG mode. Have tried it on several browsers.
Rolled update back to BI 5.3.2.5 and back to normal again. Hope BI can fix this in a future update.
User avatar
aerostar
Posts: 16
Joined: Thu Aug 27, 2020 12:39 pm

Re: Problem with UI3 since updating to BI 5.3.2.6 (9/7/2020)

Post by aerostar »

Thank you for the updates guys. I'm relieved to know mine wasn't an isolated case.

On top of optimizing my BI config, I've been revamping my network with a new router and switches (isolating the cameras and BI server in a VLAN) and treading in some unfamiliar territory, so I was starting to worry about configuration issues, especially since my IPS firewall threw up a handful of alerts that weren't making sense.

Glad to report I've reverted back to Sep 03 release and all is well once again!

Takeaway: Don't make major configuration changes during a holiday weekend and expect to hear an answer from your support community until AFTER you've pulled out all of your hair!
gmctavish
Posts: 1
Joined: Tue Sep 08, 2020 12:18 pm

Re: Problem with UI3 since updating to BI 5.3.2.6 (9/7/2020)

Post by gmctavish »

Hi, I'm having the same issue. UI3 repeatedly shows that the video delay has exceeded 30 seconds and that the stream will automatically reinitialize. This happens equally on a wifi-connected tablet, as well as a 24-core threadripper connected via 10GB ethernet, all running off a 16-core BI server. Capacity, connectivity, speed, are not the issue. This all started with the update to BI 5.3.2.6.
noblebofh
Posts: 1
Joined: Tue Sep 08, 2020 1:57 pm

Re: Problem with UI3 since updating to BI 5.3.2.6 (9/7/2020)

Post by noblebofh »

Same issue here. High-speed internal network. Switched to the old GUI until this can be resolved.
BruceH
Posts: 30
Joined: Wed Apr 01, 2020 10:10 pm

Re: Problem with UI3 since updating to BI 5.3.2.6 (9/7/2020)

Post by BruceH »

I am also having this issue on two separate systems, reverting back to the 5.3.2.5 has solved the problem, I have turned off automatic updates until this issue is resolved.
User avatar
TimG
Posts: 2098
Joined: Tue Jun 18, 2019 10:45 am
Location: Nottinghamshire, UK.

Re: Problem with UI3 since updating to BI 5.3.2.6 (9/7/2020)

Post by TimG »

Have you all reported this to support ?

Looks like I won't be updating BI5 this week.
Forum Moderator.
Problem ? Ask and we will try to assist, but please check the Help file.
Cactusboy19
Posts: 1
Joined: Tue Sep 08, 2020 5:03 pm

Re: Problem with UI3 since updating to BI 5.3.2.6 (9/7/2020)

Post by Cactusboy19 »

I am also having the same issue. After bumping down to 5.3.2.5, the problem was fixed.
leemanpa
Posts: 1
Joined: Tue Sep 08, 2020 6:17 pm

Re: Problem with UI3 since updating to BI 5.3.2.6 (9/7/2020)

Post by leemanpa »

Same problem here. Switching to Java seems to be a fix for now.
Oddly enough, it seems to be an issue with Microsoft Edge & Chrome. NOT with FireFox.
Go figure.
Post Reply