Wansview Q3 Not working in BlueIris

Post Reply
Inmate
Posts: 2
Joined: Fri Jun 21, 2019 2:25 am

Wansview Q3 Not working in BlueIris

Post by Inmate »

Hello. I have 4 portable Wansview Q3 camers I use for inside the house when I'm away. All four cameras were working until I upgraded to Blue Iris Version 5. I know all four cameras are working as I also use a phone app and I'm able to view all 4 Wansview cameras without problems. So the only thing is the upgrade to version 5. I'm actually able to control (Pan,Tilt) the cameras with Blue Iris, just no video. I have spent hours selecting different cameras and playing with settings but to no avail. Any ideas? Again, I can view all cameras with my phone app, I'm just not allowed to bring my phone into work, so I use a desktop to log into Blue Iris. I can see all the other cameras I have, just not the Wansviews. Thank you in advance.
User avatar
TimG
Posts: 2098
Joined: Tue Jun 18, 2019 10:45 am
Location: Nottinghamshire, UK.

Re: Wansview Q3 Not working in BlueIris

Post by TimG »

Hi, I would send that one in to support. One for the developers I think.
Forum Moderator.
Problem ? Ask and we will try to assist, but please check the Help file.
Inmate
Posts: 2
Joined: Fri Jun 21, 2019 2:25 am

Re: Wansview Q3 Not working in BlueIris

Post by Inmate »

Probably a good idea. Thank you.
justahobby
Posts: 2
Joined: Wed Jun 26, 2019 1:46 am

Re: Wansview Q3 Not working in BlueIris

Post by justahobby »

What setting did you use for PTZ? I'm on v. 4 and can't get it to work.
MikeBwca
Posts: 1115
Joined: Thu Jun 20, 2019 5:39 am

Re: Wansview Q3 Not working in BlueIris

Post by MikeBwca »

justahobby wrote: Wed Jun 26, 2019 1:58 am What setting did you use for PTZ? I'm on v. 4 and can't get it to work.
Do you also have Wansview Q3 cameras?
justahobby
Posts: 2
Joined: Wed Jun 26, 2019 1:46 am

Re: Wansview Q3 Not working in BlueIris

Post by justahobby »

Yes, I have the Q3 and also the K version.
MikeBwca
Posts: 1115
Joined: Thu Jun 20, 2019 5:39 am

Re: Wansview Q3 Not working in BlueIris

Post by MikeBwca »

Can you provide a screenshot of the result of the 'Find/Inspect' screen?

BI has 'Q3S', and 'Q3S RTSP' Models. If using 'Q3S RSP', then the address dropdown should be changed to RTSP.
Post Reply