Storage - Clips and archiving tab

Articles based on common support questions.
Post Reply
Posts: 90
Joined: Thu Jul 11, 2019 9:52 pm

Storage - Clips and archiving tab

Post by varghesesa »


This article documents tips and tricks based off of past tickets.

Tips and Tricks

Case 1: Move recordings

This tip is about moving recordings for whatever reason. You may have purchased a new drive etc.

Temporarily stop recordings. Easiest way to do so is to turn the Shield to red.
By doing so, the database and recording files are not being accessed by BI.

Create a folder in the Clips and archiving tab pointing to the new storage. In my example, I created Aux 3.

storage tips_gotcha 1.png
storage tips_gotcha 1.png (24.2 KiB) Viewed 53157 times

Move files to Aux3. In my example, I moved all the recordings associated with the burn camera to Aux3.

storage tips_recordings.png
storage tips_recordings.png (31.84 KiB) Viewed 53157 times

Right click in clips list -> Database -> Repair/regenerate.

Confirm camera clips are visible (my camera is called burn).
Confirm open containing folder goes to right place.

storage tips_containing folder.png
storage tips_containing folder.png (120.52 KiB) Viewed 53157 times

Aux3 in my example is NOT part of the archiving scheme.
You can definitely do so, e.g. New -> Stored -> Aux3.

Post Reply