How to add P2P Camera (Remotely)

Post Reply
karimkahale
Posts: 3
Joined: Wed Mar 24, 2021 7:34 pm

How to add P2P Camera (Remotely)

Post by karimkahale »

Hello!

I was wondering if it would be possible to add a P2P camera to Blue Iris.

I usually connect to my Dakang cameras using XMeye vision app, using the UID (serial number) and admin/pass of the camera.

The cameras are directly connected to the switch, and not through a NVR.

Can't seem to figure out how I can add the cameras remotely using their serial number via Blue Iris.

I recognize that I will be needing to use the public IP probably? Not sure.


Guidance is much appreciated. Thank you.
User avatar
TimG
Posts: 2084
Joined: Tue Jun 18, 2019 10:45 am
Location: Nottinghamshire, UK.

Re: How to add P2P Camera (Remotely)

Post by TimG »

Can't seem to figure out how I can add the cameras remotely using their serial number via Blue Iris.

I recognize that I will be needing to use the public IP probably? Not sure.
When you say "remote", do you mean internet remote, or the other side of the house remote ?

You can do a search within BI5, but it's best if you already know the IP address, username and password. Are you sure that the cameras have a RTSP feed, or are Onvif compliant ?
Forum Moderator.
Problem ? Ask and we will try to assist, but please check the Help file.
Post Reply