Astak mole setup

Post Reply
gendrake61
Posts: 1
Joined: Tue Aug 25, 2020 12:49 am

Astak mole setup

Post by gendrake61 »

Can I get help,I'm unable to get blue iris to find the camera.
louyo
Posts: 161
Joined: Sat Apr 18, 2020 1:16 am

Re: Astak mole setup

Post by louyo »

Run the camsearch tool (on the CD) to get the IP address and plug that into BI.
louyo
Posts: 161
Joined: Sat Apr 18, 2020 1:16 am

Re: Astak mole setup

Post by louyo »

Just looked on their web site and don't see anything about Onvif compliant. May not work with BI if it isn't.
User avatar
TimG
Posts: 2098
Joined: Tue Jun 18, 2019 10:45 am
Location: Nottinghamshire, UK.

Re: Astak mole setup

Post by TimG »

Specifications:

Video compression: H.264
IEEE 802.11g & 802.11b Compliant
Video resolution: 320 x 240 (QVGA), 640 x 480 (VGA)
CMOS sensor parameter adjustment: Automatic white balance (AWB), automatic gain control (AGC) backlight
compensation(BLC), automatic light control/electronic light control (ALC/ELC)
Video frame rate: 1-30 frame/second
Video compression code rate: 64Kbits/S-2Mbits/S
Audio input: One linear input, impedance: 2.2K Ω
Audio compression: G.726
Audio output: One linear output
Call input: One microphone input
Communication interface: One 10M/100M adaptive Ethernet interface supporting download of high-speed dome and decoder protocols, and transparent protocols
Input power: DC 12V/1A
Maximum power: Less than 6W
System requirement: Microsoft Windows 98/ME/2000/NT/SO/XP/Vista/MacOS
Size: 5.1"(L) x 4"(W) x 5”(H)
Weight: 12 ounces
Is this a camera you already have that you are trying to connect to BI5 ? According to the website it costs $199 and it comes from the Win Vista era. H264 but very low resolution (VGA) :shock:
Forum Moderator.
Problem ? Ask and we will try to assist, but please check the Help file.
Post Reply