Reolink RLC-810a usage

CAL7
Posts: 3
Joined: Sat Jul 31, 2021 10:08 pm

Re: Reolink RLC-810a usage

Post by CAL7 »

This is great. I've downloaded for my 820A and will install immediately. But I have a slightly OT question: I also have a 520. Is the 1sec iframe upgrade likely to be released for other cameras (specifically the 520)?
initctl
Posts: 4
Joined: Tue Aug 24, 2021 8:09 am

Re: Reolink RLC-810a usage

Post by initctl »

I'm using four of them, along with two '820a's.

I had problems initially but contacted the manufacturer who provided a beta version of the firmware that allows setting of the keyframe ratios which sorted everything.

I've set my interframe space to 1.

If you contact them and ask for "IPC_523128M8MP.494_21073003.RLC-810A.IMX415.8MP.REOLINK.pak" you may find that also solves your issues.

Untitled-1.png
Untitled-1.png (194.31 KiB) Viewed 6410 times
mike2246
Posts: 3
Joined: Wed Sep 15, 2021 2:05 pm

Re: Reolink RLC-810a usage

Post by mike2246 »

Struggling with the RLC820, I love the Image Quality and Night Vision is amazing!! but Deepstack alerts only seem to work 25% of the time, I was able to get the Main/Sub stream working and both show an avg of 13-15fps in BI. I copied the camera profile when adding from another camera that is working perfect yet Deepstack doesn't show most motions alerts in the log file.

Camera is on my Porch showing the front door/lawn/driveway, I walked out of the house to the car and within seconds got an alert. Great! I got home pulled car in driveway walked in and nothing. My Deepstack alerts are setup for person only just like my other cameras that work 95% of the time for alerts. (Other cameras, HikVision, Amcrest)

Also with the latest update of BI something changed and all my cameras greyed out the option for record dual streams if possible
Attachments
Record.JPG
Record.JPG (68.77 KiB) Viewed 6182 times
Camera.JPG
Camera.JPG (60.07 KiB) Viewed 6182 times
Video.JPG
Video.JPG (54.82 KiB) Viewed 6182 times
pspeers
Posts: 1
Joined: Sat May 15, 2021 9:51 pm

Re: Reolink RLC-810a usage

Post by pspeers »

I have been fighting with the 810A for the past week with their support and they have been focused on different stream sizes. After reading this thread I tried the following;
Used the ReoLink Model H.265 RTSP setting for the camera without the Decoder compatibility mode setting and ensured using the reolink windows client that the interframe space is set to 1 for both the clear and fluent streams
Using the ReoLink Model H.265 RTSP setting versus the Generic/ONVIF, has resulted in much better fps and the key frame rate imporoved from between 0.25 to 0.33, close to 1 as shown below. The system CPU utilization is lower and the recordings no longer pixelate or go all grey and it seems to be capturing all images, unlike before.
My only issue is the alerts only play back around 7-9 fps so they are a little choppy

Reolink 810a camera with 3.0.0.494_21073003 FW loaded (latest on ReoLink site)
Attachments
Key frame rate stays at 1
Key frame rate stays at 1
fps rates.png (27.33 KiB) Viewed 2921 times
Set to 1 for each stream
Set to 1 for each stream
Reolink H.265 stream interframe.png (241.56 KiB) Viewed 2921 times
ReoLink H.265 RSTP model setting.png
ReoLink H.265 RSTP model setting.png (172.98 KiB) Viewed 2921 times
Post Reply