Chinese PTZ Kamera

[hughirschmann]

Does anyone got this camera running (see picture).
I have problem with the settings.
Thank you
Kai

[MikeBwca]

A bit of information would be helpful...

- Make
- Model & version
- Website/link to product page.

[hughirschmann]

Camera manufacturer is WTHUNG
Model CP 08-23
I found not many information

Here is the link:

https://www.gearbest.com/ip-cameras/pp_ ... 70329.html

Thank you

[Matts1984]

Details on the problem would be helpful too

[hughirschmann]

I need the seeting due of getting no picture.
I can find the camera via search but no signal

[Thixotropic]

It says it supports ONVIF; can you post the results of an ONVIF search/probe so we can see them?

[hughirschmann]

Hello,

thank you. I fot the following feedback:

Opening 192.168.0.12 port 80...
HTTP Get / request...
Redirected to 192.168.0.12:80
OK
ONVIF GetSystemDateAndTime
2020-11-05T12:10:31.000Z
Requesting device information...
Manufacturer: EYEPLUS
Model: EYEPLUS_DEV
FirmwareVersion: 3.4.2.0725
GetCapabilities...
Querying services
Has Imaging services: /onvif/Imaging
Has media services: /onvif/Media
Has RTP_RTSP_TCP, requesting profiles
first profile is Profile_1
first source is VideoSource_1
requesting URI for profile Profile_1
RTSP URI: /
Has Event services: /onvif/Events
Has WSPullPointSupport
RelayOutputs: 0
InputConnectors: 0
Has Device IO services: /onvif/DeviceIO
AudioOutputs: 1
Has PTZ service: /onvif/PTZ
Done

[Thixotropic]

That's odd; it all looks okay to me so I'm not sure why BI won't pick up the video. (??)

Have you adjusted the video/RTSP URLs in BI to make sure they're pointing to the correct path?

Hello,

thank you. I fot the following feedback:

Opening 192.168.0.12 port 80...
HTTP Get / request...
Redirected to 192.168.0.12:80
OK
ONVIF GetSystemDateAndTime
2020-11-05T12:10:31.000Z
Requesting device information...
Manufacturer: EYEPLUS
Model: EYEPLUS_DEV
FirmwareVersion: 3.4.2.0725
GetCapabilities...
Querying services
Has Imaging services: /onvif/Imaging
Has media services: /onvif/Media
Has RTP_RTSP_TCP, requesting profiles
first profile is Profile_1
first source is VideoSource_1
requesting URI for profile Profile_1
RTSP URI: /
Has Event services: /onvif/Events
Has WSPullPointSupport
RelayOutputs: 0
InputConnectors: 0
Has Device IO services: /onvif/DeviceIO
AudioOutputs: 1
Has PTZ service: /onvif/PTZ
Done

[hughirschmann]

Hello,
I have the following settings (see picture in the attachement).

Thank you

[TimG]

Hiya,

1. Does it work with the android/ Ios YCC365 App ?
2. Are the User and Pass default, or did you set them up your self ?