Reolink RLC-420-5MP - so far so good

User avatar
Thixotropic
Posts: 29
Joined: Wed Sep 04, 2019 7:20 pm

Re: Reolink RLC-420-5MP - so far so good

Post by Thixotropic » Mon Oct 07, 2019 6:59 pm

More pics...
Attachments
foscam-mount-4.jpg
foscam-mount-4.jpg (15.83 KiB) Viewed 277 times
foscam-mount-5.jpg
foscam-mount-5.jpg (20.23 KiB) Viewed 277 times
foscam-mount-6.jpg
foscam-mount-6.jpg (18.79 KiB) Viewed 277 times

User avatar
broachoski
Posts: 13
Joined: Sun Aug 04, 2019 4:27 am
Location: Texas

Re: Reolink RLC-420-5MP - so far so good

Post by broachoski » Wed Oct 09, 2019 1:47 am

I also have been using indoor cameras outdoors. I have 2 of these Amcrest Indoor Pan/Tilt Security Wireless IP Camera IP2M-841B
ethernet wired, mounted outside to monitor the deer population. Prior to today both were supplied the required external 5 volts by a nearby power source but thanks to the above post, I installed a POE to 5 volt converter and they work great.
I used plastic electrical boxes from Home Depot, drilled large hole to allow camera to rest on its own weight when inserted upside down in the box. They have been working great for about 3 months and survived several heavy rain falls.
It is nice to use Blue Iris with PTZ to play around. Night vision does not reach very far though.
Attachments
amcrestoutdoor3.jpg
amcrestoutdoor3.jpg (94.5 KiB) Viewed 218 times
amcrestoutdoor2.jpg
amcrestoutdoor2.jpg (96.27 KiB) Viewed 218 times
amcrestoutdoor1.jpg
amcrestoutdoor1.jpg (125.25 KiB) Viewed 218 times

User avatar
Thixotropic
Posts: 29
Joined: Wed Sep 04, 2019 7:20 pm

Re: Reolink RLC-420-5MP - so far so good

Post by Thixotropic » Wed Oct 09, 2019 9:00 pm

That looks like a good, durable, weatherproof enclosure. Do those lock somehow? I'd worry about someone lifting it out and running off with it.

This also looks like it might work: https://www.homedepot.com/p/4-in-x-4-in ... /202043437

It's 4"x4"x4", which seems like it would be just about perfect for the Amcrest- the part sticking out below would reduce the inside hide to about 3".

I think I'd cut the hole, feed the ethernet cable through, form some Saran Wrap around the base, and then maybe foam the whole box in with something like Great Stuff (https://www.homedepot.com/p/GREAT-STUFF ... /206977048)

Hmmm, sounds like I'm due for a trip to Home Depot...
Attachments
REE-1030.jpg
REE-1030.jpg (33.45 KiB) Viewed 198 times

User avatar
broachoski
Posts: 13
Joined: Sun Aug 04, 2019 4:27 am
Location: Texas

Re: Reolink RLC-420-5MP - so far so good

Post by broachoski » Thu Oct 10, 2019 12:16 am

Mine is about 9x9x4 and had those tabs on them but I cut them off. The top seals with those 4 screws and there is a foam seal with it. I chose the larger box because of blowing rain since these cameras are not sealed like real outdoor cameras
I had mine mounted higher than someone could reach but lowered it. No one around here to worry about stealing it but they would be on other cameras. I like the idea frequently mentioned over on IPCT about having overlapping coverage so you will have at least 2 views of the intruders.
Concerning Blue Iris, I am learning more all the time. I like the "Timeline view" for looking back and viewing all cameras in sync.
I do not like the "Toggle PTZ controls" as it takes up space at the bottom.
If you don't know about it, toggle the "solo selected cameras" in the upper toolbar so when you click a camera full screen, you can use the cursor on the screen to pan up/dn, rt/left, and zoom.
I had it working in the past but did not know how to toggle it. I searched a lot but never could find it until searching the built in help file.
Another thing to remember is that if you are digitally zoomed in there will be a hand symbol instead of a cursor on the screen.
Another thing that ate my lunch was after getting several cameras recording full time, They recorded fine but when viewing on the GUI screen they were cycling at about 5 second intervals. Finally I found that under the main settings, cameras, set "video on remote desktop" to " unrestricted"
I chose record direct to disk, combine or cut clips to 1 hour and have Triggers set for motion detection
That's jut a few tidbits I wanted to share in case something may be of benefit.
You might want to start a new topic for future questions since we have held this Reolink topic hostage for a while.

User avatar
Thixotropic
Posts: 29
Joined: Wed Sep 04, 2019 7:20 pm

Re: Reolink RLC-420-5MP - so far so good

Post by Thixotropic » Fri Oct 11, 2019 6:47 pm

broachoski wrote:
Thu Oct 10, 2019 12:16 am
You might want to start a new topic for future questions since we have held this Reolink topic hostage for a while.
Sounds good, maybe I'll start a thread for enclosures and mounting ideas.

Post Reply