I have been trying to get an older Foscam model# 8919w to work with Blue Iris 5. I used the auto-detect by putting in the camera's IP as well as the admin port :8090 after. BI went out, auto detected the camera make and model correctly and al looked like I was good. After clicking Ok to add the camera though it just says "No Signal" for the video. It is able to get the date & time from the camera so I know they are talking. If i manually log into the camera through the browser I can see the video just fine. Any thoughts or suggestions?
Thanks
Older Foscam 8919w no signal?
-
protivakid
- Posts: 8
- Joined: Thu Sep 19, 2019 3:46 pm
-
protivakid
- Posts: 8
- Joined: Thu Sep 19, 2019 3:46 pm