Signal Loss Error on Working Camera

Post Reply
curtis-r
Posts: 13
Joined: Wed Dec 13, 2023 6:19 pm

Signal Loss Error on Working Camera

Post by curtis-r »

I have a Reolink RLC-811A with 2 duplicate camera entities I use for zone triggers. The primary camera entity is not recording anything and I think it's because it now says "No Signal", but it's working fine. Even odder is that the two duplicates of that camera work fine and don't have the "signal loss".

EDIT: Things I tried
  • I copied most the settings of one of the duplicate/working entities to the primary, and it was fine for a minute, but now is back to "signal loss".
  • Deleted and re-added the camera and left almost all the settings as default
  • Disabled the two duplicate cameras
BlueIris_v81Am34T23.jpg
BlueIris_v81Am34T23.jpg (31.88 KiB) Viewed 553 times
curtis-r
Posts: 13
Joined: Wed Dec 13, 2023 6:19 pm

Re: Signal Loss Error on Working Camera

Post by curtis-r »

I just checked "Clone Master" on that cam and at least for the last 5 minutes there is no signal lost, and it actually recorded something.
Post Reply