Remote Desktop

Post Reply
wlambrechts
Posts: 3
Joined: Tue Aug 20, 2019 7:46 pm

Remote Desktop

Post by wlambrechts »

Hi,

I have a very strange problem: I'm running BlueIris on an Intel NUC i5.

The NUC does not have a monitor attached to it, but I can access it through remote desktop. As long as my remote desktop connection is open I have no dropped frames and all is OK; as soon as I close the RDC I only get frames every 5-10 seconds... I reopen remote desktop: all is OK again etc ...

I have tried all kinds of parameters (less or more fps, resolution, motion detecion on/off) but the problem does not seem to be related to these settings. The PC is running at 10-20 % CPU.

Thanks
Post Reply