Page 1 of 1
objects are blurred
Posted: Sun Jan 14, 2024 7:43 pm
by mpl
Hello, im now on day six in the Demo and nearly to buy the Full version
I have now a problem that sometimes a moved object in the Snapshots are blurred.
Is there Something wrong my settings? is my hardware to slow?
- Screenshot 2024-01-14 204025.png (51.56 KiB) Viewed 37362 times
- Screenshot 2024-01-14 203249.png (127.75 KiB) Viewed 37362 times
- Cam3.20240114_202150000.11.jpg (233.91 KiB) Viewed 37362 times
objects are blurred
Posted: Mon Jan 15, 2024 9:33 am
by IAmATeaf
What cam do you have and what are its settings in terms of, shutter, video codec, bitrate etc.
BI just takes whatever stream you feed so if you are getting blurring, trailing or pixelation then start by looking at the settings within the cam itself.
Re: objects are blurred
Posted: Mon Jan 15, 2024 11:37 am
by IAmATeaf
One other thing go I’ve remember is I used to get this ghosting when using specific video graphics drivers. So again something worth checking to see what version you have installed and if there is a manufacturer tested update available.
Re: objects are blurred
Posted: Mon Jan 15, 2024 4:33 pm
by mpl
Hello,
i have one Dahua, one Dallmeier and a Hikvision.
The ghosting is on each cam. Bevor BI i run Zoneminder on the Same host, there was no Problem with it.
graphic is onboard on the Intel i3-8109. Driver is installed from the Driver Tool and Up to date
Re: objects are blurred
Posted: Mon Jan 15, 2024 7:32 pm
by TimG
H.264B - Does the 'B' mean "Basic" ? Is there a lower and possibly more compatible version of H264 ? Probably not if it is the same on three cameras. Bit rates are high enough too.
Please show the Blue Iris status/ Cameras screen.