BlueIris slow / remote desktop

Post Reply
wlambrechts
Posts: 3
Joined: Tue Aug 20, 2019 7:46 pm

BlueIris slow / remote desktop

Post by wlambrechts »

Hi,

I have a very strange problem: I'm running BlueIris on an Intel NUC i5.

The NUC does not have a monitor attached to it, but I can access it through remote desktop. As long as my remote desktop connection is open I have no dropped frames and all is OK; as soon as I close the RDC I only get frames every 5-10 seconds... I reopen remote desktop: all is OK again etc ...

I have tried all kinds of parameters (less or more fps, resolution, motion detecion on/off) but the problem does not seem to be related to these settings. The PC is running at 10-20 % CPU.

Rhanks
thom900
Posts: 1
Joined: Mon Oct 14, 2019 7:11 pm

Re: BlueIris slow / remote desktop

Post by thom900 »

I had experience a similar issue and it was all just a simple setting to change. I have my BI setup in a server closet so the only way I access it is via RD, this was becoming frustrating with the delay.
This is what the setting looked like when I was getting the issue of a dropped frames slowness:
Image

This is what I changed it to and now it runs flawlessly:
Image

Just go into your settings>Cameras>Change "Viedeo during Remote Desktop">Unrestricted
User avatar
TimG
Posts: 2098
Joined: Tue Jun 18, 2019 10:45 am
Location: Nottinghamshire, UK.

Re: BlueIris slow / remote desktop

Post by TimG »

As software guys would say, "It's a feature, not a bug !" :lol:
Forum Moderator.
Problem ? Ask and we will try to assist, but please check the Help file.
Post Reply