Reolink Duo 2 - individual streams?

Post Reply
grahamck
Posts: 2
Joined: Sat Sep 02, 2023 4:17 pm

Reolink Duo 2 - individual streams?

Post by grahamck »

I have tried various things i have found on this board and others, but I cannot seem to find the right configuration to split the two reolink duo 2 cameras into individual streams.

I love the two merged into one for casual viewing, but when exporting I'd sometimes like to have the individual camera streams too.

If anyone has this working please help me out with instructions on how you did it!!


Thanks!
User avatar
TimG
Posts: 2098
Joined: Tue Jun 18, 2019 10:45 am
Location: Nottinghamshire, UK.

Re: Reolink Duo 2 - individual streams?

Post by TimG »

Can you show your camera settings page in BI5 ? I'm wondering if there is any obvious integer that can be tweaked.
Forum Moderator.
Problem ? Ask and we will try to assist, but please check the Help file.
grahamck
Posts: 2
Joined: Sat Sep 02, 2023 4:17 pm

Re: Reolink Duo 2 - individual streams?

Post by grahamck »

yes - thanks for having a look
Screenshot 2023-09-02 130045.png
Screenshot 2023-09-02 130045.png (41.64 KiB) Viewed 15063 times
User avatar
TimG
Posts: 2098
Joined: Tue Jun 18, 2019 10:45 am
Location: Nottinghamshire, UK.

Re: Reolink Duo 2 - individual streams?

Post by TimG »

A web search didn't give me any clues. Can you ask Reolink Support if it is possible ? In the mean time, what happens if you increment Cam# ?
Forum Moderator.
Problem ? Ask and we will try to assist, but please check the Help file.
IAmATeaf
Posts: 466
Joined: Mon Jun 17, 2019 7:48 pm

Re: Reolink Duo 2 - individual streams?

Post by IAmATeaf »

When you do a find/inspect on the cam what does Bi find and report back? That might give you a clue as what stream parameter(s) you might be able to use/test.
User avatar
Pogo
Posts: 396
Joined: Tue Jul 18, 2023 7:21 pm
Location: Reportedly in the Area

Re: Reolink Duo 2 - individual streams?

Post by Pogo »

Seems like such a setup would either require channelized output capability (A and B / 1 and 2? as would be the case with a DVR), or an IP address for each stream, (or A and B ports for a single address) so each one could be segregated and processed separately as two cameras by BI if desired.
Post Reply