Testing Trigger with Required AI Object

Post Reply
Judman13
Posts: 4
Joined: Fri Jun 25, 2021 5:12 pm

Testing Trigger with Required AI Object

Post by Judman13 »

Hey,

I am trying some funky PTZ stuff. I have a 2.8mm fixed cam mounted nice a high and I want to use zones to trigger a PTZ to zoom in on certain areas based on objects detected. I have zones A and B configured in the motion settings and it's almost a 50/50 split. I then set up the immediate actions so when a person is in either zone the PTZ cam would move to that zone. However, when I go to test the trigger and put in the required AI object it fails. If I take the AI object out, then the test function works. I haven't gotten to walk testing just yet.

Here is the action configuration. Zone A, person, Move PTZ to preset.
https://imgur.com/hXuqKiG

Test trigger. Zone A, person.
https://imgur.com/9XYWsIZ

Result failed!
https://imgur.com/Gsdttbb

Any ideas?
Post Reply