Live view only working for selected camera

Post Reply
TonyBlack1964
Posts: 2
Joined: Mon Aug 30, 2021 11:58 am

Live view only working for selected camera

Post by TonyBlack1964 »

Hoping someone can put me straight on this. Previously I had Blue Iris configured so that all cameras (x8) were showing live all the time. Now, and I don't know why, only the camera that is selected will show live view. Any ideas?
Screenshot small.jpg
Screenshot small.jpg (69.94 KiB) Viewed 2101 times
TonyBlack1964
Posts: 2
Joined: Mon Aug 30, 2021 11:58 am

Re: Live view only working for selected camera

Post by TonyBlack1964 »

OK, have answered my own question. I had enabled the 'Limit decoding unless required' option for all cameras hoping to reduce the CPU usage. It did drastically reduce CPU usage but it also disabled live view for all except a selected camera. Will have to live with the high CPU usage.
User avatar
YrbkMgr
Posts: 587
Joined: Sun Nov 24, 2019 12:56 am
Location: Chicagoland

Re: Live view only working for selected camera

Post by YrbkMgr »

You might consider reviewing Optimizing Blue Iris's CPU Usage
  • "Whenever I take something apart to fix it and put it back together again, I end up with like six really important looking pieces left over" -Tim Allen
  • If you know what your after, you'll recognize it when you see it.
Post Reply