BI 5.0.0.61 dead

eboggs_jkvl
Posts: 29
Joined: Tue Jun 18, 2019 4:21 pm
Location: Jacksonville FLorida

Re: BI 5.0.0.61 dead

Post by eboggs_jkvl » Wed Jul 17, 2019 11:59 pm

Upon further review, I looked at the properties of the file he downloaded and it is V.65. So I'm running 5.0.0.65 and it works just fine.

Elmer

eboggs_jkvl
Posts: 29
Joined: Tue Jun 18, 2019 4:21 pm
Location: Jacksonville FLorida

Re: BI 5.0.0.61 dead

Post by eboggs_jkvl » Thu Jul 18, 2019 5:57 am

reddawg wrote:
Wed Jul 17, 2019 11:17 pm
After updating to version 5.0.0.65 x64, it looks like my crash issues are resolved. I am running Blue Iris version 5.0.0.65 x64 as an application, not as a service. I have closed Blue Iris 5 (console) multiple times and re-launched it successfully with no crashes. I will be monitoring Blue Iris memory usage over the next day or so to see if it climbs, which is indictive of a memory leak.

Here is a history of crashes by versions:

v5.0.0.57 x64 - Good, no crashes
v5.0.0.58 x64 - Good, no crashes
v5.0.0.59 x64 - Good, no crashes
v5.0.0.61 x64 - CRASHES
v5.0.0.62 x64 - CRASHES
v5.0.0.63 x64 - CRASHES
v5.0.0.64 x64 - CRASHES
v5.0.0.65 x64 - Good, no crashes

Crossing fingers, banging on wood.
I had v64 and it also was a crasher

Elmer

User avatar
reddawg
Posts: 66
Joined: Sun Jun 30, 2019 11:29 am

Re: BI 5.0.0.61 dead

Post by reddawg » Thu Jul 18, 2019 7:00 am

Update: since updating to version 5.0.0.65 x64, no crashes and memory usage has not climbed over last 8 hours. I conversed with about half a dozen other people having crashing issues with .61, .62, .63, .64 and they are all proclaiming success with v5.0.0.65.

jmm05
Posts: 2
Joined: Wed Jul 03, 2019 2:13 pm

Re: BI 5.0.0.61 dead

Post by jmm05 » Thu Jul 18, 2019 9:04 am

Hi,

For me also more memory issues :D
One month and half fighting with BI5 ....It was starting to take a long time

JM

jmm05
Posts: 2
Joined: Wed Jul 03, 2019 2:13 pm

Re: BI 5.0.0.61 dead

Post by jmm05 » Thu Jul 18, 2019 9:11 am

Hi,
For me also more memory issue
One month and half fighting with BI5... It was starting to take a long time

JM

eboggs_jkvl
Posts: 29
Joined: Tue Jun 18, 2019 4:21 pm
Location: Jacksonville FLorida

Re: BI 5.0.0.61 dead

Post by eboggs_jkvl » Thu Jul 18, 2019 12:35 pm

Case Closed.


Thank you very much for your help.



Elmer

MikeBwca
Posts: 202
Joined: Thu Jun 20, 2019 5:39 am

Re: BI 5.0.0.61 dead

Post by MikeBwca » Thu Jul 18, 2019 2:02 pm

Ohh, that's right. Thanks. I've updated my notes.

gbotting
Posts: 3
Joined: Wed Jul 17, 2019 8:17 pm

Re: BI 5.0.0.61 dead

Post by gbotting » Thu Jul 18, 2019 9:30 pm

Cameras are still saying they have no signal, any ideas?

MikeBwca
Posts: 202
Joined: Thu Jun 20, 2019 5:39 am

Re: BI 5.0.0.61 dead

Post by MikeBwca » Fri Jul 19, 2019 6:01 am

gbotting wrote:
Thu Jul 18, 2019 9:30 pm
Cameras are still saying they have no signal, any ideas?
Can you start a new separate thread for your issue? This thread was for a different issue. It's multi page, and difficult to go back and view your posts.

User avatar
TimG
Posts: 224
Joined: Tue Jun 18, 2019 10:45 am
Location: Nottinghamshire, UK.

Re: BI 5.0.0.61 dead

Post by TimG » Fri Jul 19, 2019 6:42 pm

I've just made the time to do some updates. BI5 up to 5.0.0.65, and all cameras working well. Reboot twice and all starting OK. I then went for the Win10 1903 update. Crikey that took a long time ! When the server rebooted, most programs still worked OK, but BI5 had lost my two old analogue cameras. They are plugged in to a Eurysys Piccolo Pro 2 card, so off I went for an updated version of their Multicam software. Installed, and all cameras back to normal. Pretty uneventful after the palaver you guys have had :shock:
Blue Iris v5.0.6.10 | Dahua IPC-HDW5231R-ZE, Foscam R2, Ertech 4MP, 2 analogue cameras on Euresys Picolo Pro 2 | FX-8350 AMD CPU, 32GB Ram, Multiple SSD and HD| Homeseer HS3 Pro | TVMosaic | Emby | DVBViewer |

Post Reply