Blue Iris

Hi,

Today was the day that I started my 15 day demo with blue iris. It seems very likely that it will replace my ispy server completely. There is still one thing that I really do not understand even though I red manual thousand times. How to send snapshot to email.

Here's the thing:
- Someone pushes doorbell button and I'm able to send web requests to Blue iris server
- It generates web request: http://192.168.86.30:81/admin?camera=fr ... a&snapshot to get a snapshot.
- But how do I automate blue iris to send this photo as email attachments immediately as it is taken?

I was wondering about triggers. As a newbie I thought that there has to be trigger that creates alarm which sends snapshot to email. When I look at the triggers there is possibility to use "motion", "DIO" or "digital input". It seems like none of those really works as a trigger in this case..
I'm triggering motion to "on" when home security alarm is on and then I turn motion off when system is disarmed. This all happens in one default profile.
Do I have to create new profile or do I need something else than triggers to succeed. I'm almost done with whole setup...but this makes my head spin because I do not understand how it could work..

And another couple of questions..

How should group web requests work. I'm using webcore to send requests to Blue iris.
According manual there is just a few requests that can be made for the groups. Most of request types are for the individual cameras.
So, if I want to turn motion off from all of my cameras I need to send this request to all my 10 cameras:
http://192.168.86.30:81/admin?camera=camera&motion=0

So webcore piston would be:
run these lines when something happens
http://192.168.86.30:81/admin?camera=camera1&motion=0
http://192.168.86.30:81/admin?camera=camera2&motion=0
http://192.168.86.30:81/admin?camera=camera3&motion=0
http://192.168.86.30:81/admin?camera=camera4&motion=0
etc..

Wouldn't it be more ideal for user to be able send this command as a group?
http://192.168.86.30:81/admin?camera=group&motion=0

Of course I thought that this is the right way to go but it is not possible. Why?

Second question in this post. What are these numbers in recorded clips:

Upper says 24m30s and lower 32m53s. What are those numbers. Clips are both under 30M and upper clip is 55sec long and lower is 27sec.