Some MQTT messages not sending

Post Reply
ocgltd
Posts: 2
Joined: Wed Jul 26, 2023 8:48 pm

Some MQTT messages not sending

Post by ocgltd »

I just setup MQTT messaging from Blue Iris 5.3 and I am getting regular messages from BI with payload "stopped". I found this message on page 168 of the manual, but not what it means. What does this mean? BI is still running...so its not that the app has stopped.

My trigger ON messages are arriving at the MQTT broker, but the OFF messages are not. Each camera is set to "de-trigger" after 20 seconds, and I have an on-reset MQTT message setup.

Is this correct? Should de-triggering cause the off message to be sent?
User avatar
TimG
Posts: 2084
Joined: Tue Jun 18, 2019 10:45 am
Location: Nottinghamshire, UK.

Re: Some MQTT messages not sending

Post by TimG »

Trigger Off payload works fine here. I've not seen "stopped" before. Must have a look.
Forum Moderator.
Problem ? Ask and we will try to assist, but please check the Help file.
Post Reply