ESP32 Tasmota

General discussion about Blue Iris
Post Reply
sailing
Posts: 8
Joined: Sat Jul 03, 2021 8:02 am

ESP32 Tasmota

Post by sailing »

Hi, is anyone using an ESP32 with BI. I can't get the correct video settings. I have tried port 81,mjpeg setting, /stream and/or /cam.mjpeg but can't get it to work.

Any help would be appreciated.
sailing
Posts: 8
Joined: Sat Jul 03, 2021 8:02 am

Re: ESP32 Tasmota

Post by sailing »

I found the settings
use :81 at the end of your IP address
no username or password
Brand is EasyCam
MJPEG
Profile /stream
User avatar
TimG
Posts: 2098
Joined: Tue Jun 18, 2019 10:45 am
Location: Nottinghamshire, UK.

Re: ESP32 Tasmota

Post by TimG »

Good info thanks. What is the maximum resolution and FPS you can do with these ?
Forum Moderator.
Problem ? Ask and we will try to assist, but please check the Help file.
sailing
Posts: 8
Joined: Sat Jul 03, 2021 8:02 am

Re: ESP32 Tasmota

Post by sailing »

Apparently they can go up to 1600x1200. Not bad for ten dollars!!!! I am using mine to internally monitor a delivery box and am only using 320x240. BI says the stream is 0.1M and about 20fps at that resolution. One of the problems with these units is that they overheat and I am wanting to reduce the frame rate to avoid this problem.
Post Reply