LTS DVR monitoring?

General discussion about Blue Iris
Post Reply
josephchrzempiec
Posts: 4
Joined: Mon Mar 02, 2020 8:27 am

LTS DVR monitoring?

Post by josephchrzempiec » Wed Apr 07, 2021 7:17 pm

Hello When i found out that blueiris can support Ip Poe cameras from lts security cameras i was happy. Because that is the only cameras i use. So i did a little research on dvr systems from lts which i do have and found not really to help me. Then i went into the Lts dvr settings and found out that it has a RTSP setting. Which made me even more happier beause i can add the DVR to blueiris.

So i have tired the Lts dvr and i was able to get the dvr to show up in in blueiris now i have a mix of Nvr cameras and Dvr cameras.
However i can only get the first camera working. Has anyone tried to this yet? I don't see anyone in the forum trying this out. I'm just try to get the other 3 cameras to show up in blueiris.


Joseph


Edit: I did see that in the Find/inspect it sees alll from the Dvr system. It just doesn't map it. And sense I'm new to blueiris i have no clue how to set it up?
User avatar
TimG
Posts: 998
Joined: Tue Jun 18, 2019 10:45 am
Location: Nottinghamshire, UK.

Re: LTS DVR monitoring?

Post by TimG » Thu Apr 08, 2021 6:41 pm

Hi, on the BI5 Video configuration settings page that shows the IP address, what does it show for "Stream Profiles - Main" ?

There is a possibility that your DVR can only output one camera, but if there is a number in the stream profile, it may be able to do more. Let us know what you can see.
BI5 v54402 x64 | Win10 20H2 | Dahua IPC-HDW5231R-ZE, Foscam R2, Ertech 4MP, Neos2, 2 SD cams | BI5:1 i5-3330, 16GB Ram, Multiple SSD and HD | Homeseer HSPhone | TVMosaic | BI5:2 Ryzen 1800X, 16GB Ram, Multiple SSD and HD | Homeseer 4 | Emby | DVBViewer.
Post Reply