Capture JPG on motion trigger

General discussion about Blue Iris
Post Reply
mish
Posts: 1
Joined: Wed Mar 24, 2021 11:14 pm

Capture JPG on motion trigger

Post by mish »

Hi everyone,

I'm new to Blue Iris, but it's working very well for me.
I'd like to capture a single frame as a JPEG when a motion trigger occurs and make it accessible over HTTP.
This is so on an MQTT trigger, Home Assistant can send a Signal message with a still image in it.
I actually have this working, but I feel like I've come up with a "hack" and would like to know if someone has a better way of exposing the frame that triggered the motion as web accessible JPG.

What I've done is as follows:
Image

This allows me to curl/download from the following URL:

Code: Select all

http://username:password@1.2.3.4:81/Alerts/SidePath_002.jpg
(002 seems to be where the motion generally happens).

Open to any suggestions on a better approach. :)
Post Reply