Public link for my camera feeds

General discussion about Blue Iris
Post Reply
herbse48
Posts: 2
Joined: Tue Aug 27, 2019 3:42 am

Public link for my camera feeds

Post by herbse48 » Mon Jul 13, 2020 6:24 am

Hi, just wondering if there was a way to share my cameras feed with people, similar to the webview, but without needing the login and have access to change anything.


Thanks
User avatar
TimG
Posts: 1114
Joined: Tue Jun 18, 2019 10:45 am
Location: Nottinghamshire, UK.

Re: Public link for my camera feeds

Post by TimG » Sat Jul 18, 2020 6:51 pm

Hiya,

Have you seen this on how to add a BI cam to Youtube : http://usefulramblings.org/?page_id=10821

That should stop people fiddling with your settings ! Good luck,

Tim
BI5 v54904 x64 | Win10 21H1 | Dahua IPC-HDW5231R-ZE, Foscam R2, Ertech 4MP, Neos2, 2 SD cams | BI5:1 i5-3330, 16GB Ram, Multiple SSD and HD, Homeseer 2 HSPhone, TVMosaic | BI5:2 Ryzen 1800X, 16GB Ram, Multiple SSD and HD, Homeseer 4, Emby, DVBViewer.
User avatar
hotbrass
Posts: 35
Joined: Sat Jan 11, 2020 8:40 pm

Re: Public link for my camera feeds

Post by hotbrass » Sat Jul 18, 2020 10:46 pm

In order to do this does it open BI to the whole world?
User avatar
TimG
Posts: 1114
Joined: Tue Jun 18, 2019 10:45 am
Location: Nottinghamshire, UK.

Re: Public link for my camera feeds

Post by TimG » Sun Jul 19, 2020 8:52 am

I assume you are asking if it makes all of your BI5 cameras publicly visible on Youtube :shock:

The link shows how to do it for an individual camera, which is what I think the OP was after :D

It certainly makes it easy for non techie people to view one of your cameras from elsewhere. No login required, and no fiddling with settings. Please note that I haven't tried it !
BI5 v54904 x64 | Win10 21H1 | Dahua IPC-HDW5231R-ZE, Foscam R2, Ertech 4MP, Neos2, 2 SD cams | BI5:1 i5-3330, 16GB Ram, Multiple SSD and HD, Homeseer 2 HSPhone, TVMosaic | BI5:2 Ryzen 1800X, 16GB Ram, Multiple SSD and HD, Homeseer 4, Emby, DVBViewer.
Post Reply