Record Tab

Details on the five major steps to configure and deploy Blue Iris.
1. Connecting IP cameras.
2. Configuring your home or office network for Remote Access via a web browser or the phone apps.
3. Setting up Storage and Recordings.
4. Creating Triggers and Alerts.
5. Creating Schedules and Profiles
Post Reply
varghesesa
Posts: 28
Joined: Thu Jul 11, 2019 9:52 pm

Record Tab

Post by varghesesa » Fri May 28, 2021 2:51 am

Introduction

This article goes under the covers of the Recording tab. We share how BI records which should hopefully provide a better understanding of the settings. With this understanding, you should have a better appreciation of the software as well as how to leverage the software to meet your requirements.

If you prefer to listen instead of read, watch the webinar associated with this article, "The Recording Tab" webinar. YouTube channel.

We also have an overview "Recordings and Storage webinar" for those who are new to BI. See our onboarding playlist in the YouTube channel.

User Interface

The triggers on the clip list and the timeline are the key interfaces used to access recordings.

recording_main screen.png
recording_main screen.png (232.57 KiB) Viewed 776 times

And keep in mind the connection between the triggers in the clip list and the triggers in the timeline.
recording_UI.png
recording_UI.png (57.54 KiB) Viewed 776 times

Now I'm going to make the connection between the BI settings/dialogs and the user interface.

recording_ui-settings_optimized.png
recording_ui-settings_optimized.png (63.92 KiB) Viewed 767 times



Video Settings

When+ vs Continuous+

recording_video settings.png
recording_video settings.png (202.01 KiB) Viewed 772 times

Periodic

recording_periodic.png
recording_periodic.png (143.29 KiB) Viewed 771 times



File Storage Options

Combine or cut video each:

recordings_combine or cut.png
recordings_combine or cut.png (151.07 KiB) Viewed 769 times

Cut video when triggered with break time

recordings_cut video.png
recordings_cut video.png (159.83 KiB) Viewed 769 times



Recording Decision Tree

recording_decision tree.png
recording_decision tree.png (131.32 KiB) Viewed 766 times

recording_decision tree 2.png
recording_decision tree 2.png (142.84 KiB) Viewed 766 times

recording_decision tree 3.png
recording_decision tree 3.png (165.34 KiB) Viewed 766 times

recording_decision tree summary.png
recording_decision tree summary.png (62.75 KiB) Viewed 766 times


Recording File Options Scenarios/Use cases
recording_file options.png
recording_file options.png (141.93 KiB) Viewed 765 times

recording_file options 2.png
recording_file options 2.png (166.92 KiB) Viewed 765 times

Periodic Use Cases

The Periodic recording is largely used by environmental groups. One use case is a Wildlife organization that counts the salmon population with underwater cameras.

The Triggered + Periodic: Some users did not have enough storage and therefore use this instead of the continuous options.
Kind of provides a summary/timelapse review of the day.



Gotchas

The gotchas section is really about sharing information that came from tickets or questions from past customers. Sharing the knowledge makes everyone better!

Gotcha 1: Recordings off or skipped

The only way to cause a time jump in the recording
  • If the CPU is overloaded (>80%), then BI may be too busy to fulfill all the camera settings.
  • Recordings were somehow stopped and then restarted. For example, did the Windows power settings result in recordings being stopped?
    Are you running BI as a service? If so, did the software crash and restart?
  • Was the camera temporarily paused in BI?

    camera paused.png
    camera paused.png (101.78 KiB) Viewed 29 times
  • Was the shield red?

    red shield.png
    red shield.png (34.49 KiB) Viewed 29 times
  • Was the camera not active for certain profiles? Camera settings -> General tab.

    camera profiles.png
    camera profiles.png (18.6 KiB) Viewed 29 times
Finally, any errors in the Status -> Log?
Can you reproduce the issue?
Post Reply