Yes it can be done easily using camera/Schedule/Events schedule create a function for sunrise or time then PTZ Preset number and then make another one for sunset or time PTZ preset number

First uninstall codeproject using the uninstaller or run the exe and select remove or uninstall if you get it, then just to check go to C:\Program Files\ make sure there is no Codeproject folder there if there is delete it if not fine. Reboot machine and install again. There's a nice how-to here to ...

That's correct, that is where it is now.

In theory A>C I use A>B that only works one way for me with an occasional hiccup..

Tick zones and hotspot then edit and create a full page invert as A and set B to a zone you want covered by that camera
object detection set to B plus any other zones you set up seperated by a ,
object travels untick reset detector untick
try that..

Definetly Use Macrium Reflect its free also to non commercial users has save me many many times

if you are only going to use a shortish length you could blow some small rope or small cable using your little compresser and a plastic bat on the end that goes like a rocket on rope or cord then pull the cable in on the rope or cord..
Ricky

Hi Scott, I guess its a long way but the best option is to run some subduct or some type of stiff plastic tubing and run the cable through that I have done a couple of long cat6 runs well under 100 meters which really is about the cat6 poe limit, you could use fibre but you would have to power the c...

There is a Foscam tool to find ip and port ect
https://foscamhelp.zendesk.com/hc/en-us ... amera-Tool

Hi Scott, the pc I have has an intel(R) Core(TM) i7-6700K CPU @ 4.00GHz 4.00 GHz, 32.0 GB, windows 10 profesional and a Western Digital Purple 2TB Surveillance 3.5 Inch SATA Hard Disk Drive. It runs one camera with hardly any cpu use. The camera I have is a Foscam FI9928P ptz Wifi or wired, 1080P Fu...